9
Getting Started
CAUTION
2
Read the LIMITED USE LICENSE AGREEMENT ( page 26)
Before removing the seal covering the power switch, read the LIMITED USE LI-
CENSE AGREEMENT.
3
Insert the battery pack
1 Turn your computer over.
2 Slide the latch, and then without releasing it, slide and remove the battery pack
cover.
3 Insert the battery pack into the computer with the label-side down.
First-time Operation
Read the steps below to help you learn what parts are included, and to gain an understanding of
some basic computer-related operations.
1
Confirm the inclusion of all parts
Make sure the parts shown in the figure have been supplied. If any of these items are
missing or is not working properly, contact Panasonic Technical Support.
Cover
Model No: CF-AA1653
AC Adaptor ........... 1
Model No: CF-VZSU14B
AC Cord ................1
Battery Pack........1
Modem Telephone
Cable ..................... 1
Floppy Disk Drive ... 1
2
3
Latch
Label-side down
Be sure the battery pack is properly connected to the connector.
Do not touch the terminals on the battery pack and the computer. The bat-
tery pack may no longer function properly if the contacts are dirty or dam-
aged. Also, the computer may not operate properly.
Operating Instructions (This book)................ 1
Windows Book........................................... 1
WinDVD
TM
CD-ROM.................................... 1
WinDVD
TM
Leaflet ...................................... 1
Product Recovery CD-ROM ...................... 4
( “Touchscreen”)
Soft Cloth .................................. 1
Stylus ..................................... 1
<Only for Models with touchscreen>
AC Adaptor ........... 1
AC Cord ................1
Battery Pack........1
Floppy Disk Drive ... 1
Operating Instructions (This book)................ 1
Windows Book........................................... 1
WinDVD
TM
CD-ROM.................................... 1
WinDVD
TM
Leaflet ...................................... 1
Product Recovery CD-ROM ...................... 4