Filter
Top Products
46
Using the RGB REALITY mode
The RGB REALITY mode is a mode for converting RGB (primary color) input signals to component signals,
performing high picture quality playback using image conversion processing specially for moving pictures.
You can choose the RGB mode best suited for the type of RGB signals you are using (refer to page 40):
RGB mode: Choose this mode when the RGB signal source is a PC or other computer-based device that focuses
on still images.
RGB REALITY mode: Choose this mode when the RGB signal source is a scan converter or other video
equipment that focuses on moving images.
Signal name
480i
576i
480p
720/60p
1035/60i
1080/60i
1080/24p
1080/50i
1080/30p
1080/25p
1080/24sF
Except above list
fH(kHz)/fV(Hz)
15.73/60
15.63/50
31.47/60
45.00/60
33.75/60
33.75/60
27.00/24
28.12/50
33.75/30
28.12/25
27.00/48
RGB mode RGB REALITY mode
Remarks
RGB mode only
Compatible (factory default)
Compatible (when you apply the RGB Reality mode to the signal formats marked with ,
select the signal format with the SYSTEM SELECTOR button, and then register it with the
projector’s memory.)
These signal formats may not be compatible with RGB mode depending on
signal conditions. Use the RGB Reality mode.
Not compatible
The following lists the video signal formats compatible with the RGB Reality mode:
• In the RGB REALITY mode, optimum adjustment values are pre-set, so it is not possible to automatically adjust
the picture (pages 47, 48) or the input signal resolution (page 49).
• When in RGB REALITY mode, all of the projector’s adjustments provide the same functions as those for the
YPBPR(or YCbCr) input.
NOTE