Filter
Top Products
69
This projector is provided with an ID number function, so that if multiple projectors are being used together, the
projectors can be controlled all at once or separately using a single remote control unit.
Because the factory pre-setting of the ID number is ALL, using only one projector do not require this setting.
Setting ID numbers
Setting procedure
Press the MENU button. ... The MENU screen will be displayed.
Press the UP( )and DOWN( ) arrow buttons to select OPTION.
Press the ENTER button. ... The OPTION screen will be displayed.
Press the LEFT( )and RIGHT( )arrow buttons to change the value.
(ALL, 1, 2, ..., 64)
Press the MENU button twice. ... This completes the setting.
•The setting is complete. At that time, the on-screen display will disappear and the
screen will return to the normal state.
• The ID numbers can be set to ALL or to a number from 1 to 64.
• The ID number is set to ALL at the time of shipment from the factory.
• When setting ID numbers, the ID number of the remote control unit must match the ID number of he
projector.
• All projectors which have had their ID numbers set to ALL will operate regardless of which number is
specified when using the remote control unit or a personal computer to control the projectors.
If the projector is connected to other projectors and its ID number is set to ALL, it will not be possible to
control the projector separately from other projectors with different ID number settings.