Filter
Top Products
80 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
[S-VIDEO] Sets the input to be projected when the projector is switched on to S-VIDEO.
[DVI-D] Sets the input to be projected when the projector is switched on to DVI-D.
[HDMI] Sets the input to be projected when the projector is switched on to HDMI.
[RS-232C]
Set the communication conditions of the <SERIAL IN>/<SERIAL OUT> terminal.
To set the communication condition of the <SERIAL IN> terminal
1)
Press as to select [RS-232C].
2)
Press the <ENTER> button.
rf
The [RS-232C] screen is displayed.
3)
Press as to select [(IN) BAUDRATE].
4)
Press qw to switch [(IN) BAUDRATE].
rf
The setting will change among [9600], [19200], and [38400]
each time you press the button.
5)
Press as to select [(IN) PARITY].
6)
Press qw to switch [(IN) PARITY].
rf
The setting will change among [NONE], [EVEN], and [ODD]
each time you press the button.
rr
[(IN) BAUDRATE]
[9600]
Select the proper speed.[19200]
[38400]
rr
[(IN) PARITY]
[NONE]
Select the parity condition.[EVEN]
[ODD]
To set the communication condition of the <SERIAL OUT> terminal
1)
Press as to select [RS-232C].
2)
Press the <ENTER> button.
rf
The [RS-232C] screen is displayed.
3)
Press as to select [(OUT) BAUDRATE].
4)
Press qw to switch [(OUT) BAUDRATE].
rf
The setting will change among [9600], [19200], and [38400]
each time you press the button.
5)
Press as to select [(OUT) PARITY].
6)
Press qw to switch [(OUT) PARITY].
rf
The setting will change among [NONE], [EVEN], and [ODD]
each time you press the button.
rr
[(OUT) BAUDRATE]
[9600]
Select the proper speed.[19200]
[38400]
rr
[(OUT) PARITY]
[NONE]
Select the parity condition.[EVEN]
[ODD]
To set the response
1)
Press as to select [RS-232C].
2)
Press the <ENTER> button.
rf
The [RS-232C] screen is displayed.
3)
Press as to select [RESPONSE(ID ALL)].
4)
Press qw to switch [RESPONSE(ID ALL)].
rf
The setting will change between [ON] and [OFF] each time you
press the button.
5)
Press as to select [GROUP].