Filter
Top Products
ENGLISH - 91
Chapter 4 Settings — [SECURITY] menu
3)
Press as to select [CONTROL PANEL] or
[REMOTE CONTROL].
4)
Press the <ENTER> button.
rf
The [CONTROL PANEL] screen or the [REMOTE CONTROL]
screen is displayed.
5)
Press as to select an item, and press the
<ENTER> button.
6)
When the confirmation is displayed, select [OK]
or [CANCEL], and press the <ENTER> button.
rr
[CONTROL PANEL] and [REMOTE CONTROL]
rf
You can set the limitation on the control from the control panel and
remote control.
[ENABLE] Enables all button operations on the projector body and remote control.
[DISABLE] Disables all button operations on the projector body and remote control.
Note
rf
When a button operation is performed on the device set to [DISABLE], the [SECURITY PASSWORD] screen is displayed.
Enter the security password.
rf
The [SECURITY PASSWORD] screen will disappear when the <MENU> button is pressed, or when there is no operation for approximately
ten seconds.
rf
If the operations of both [CONTROL PANEL] and [REMOTE CONTROL] are set to [DISABLE], the projector cannot be turned off (cannot
enter standby).
rf
When the setting has completed, the menu screen will disappear. To operate continuously, press the <MENU> button to display the main
menu.