Filter
Top Products
ENGLISH - 85
Chapter 4 Settings — [TEST PATTERN] menu
[TEST PATTERN] menu
Select [TEST PATTERN] from the main menu.
Refer to “Navigating through the menu” (
x
page 51) for the operation of the menu screen.
rf
Press
qw
to switch.
[TEST PATTERN]
Displays the test pattern built-in to the projector.
Settings of position, size, and other factors will not be reected in test patterns. Make sure to display the input signal before performing various
adjustments.
1)
Press qw to switch [TEST PATTERN].
rf
The setting will change among “Menu screen + Focus”, “Menu
screen + Entry screen”*, “Menu screen + All white”, “Menu
screen + All black”, “Menu screen + Flag”, “Menu screen + Flag
(inversion)”, “Menu screen + Window”, “Menu screen + Window
(inversion)”, “Menu screen + Color bar (vertical)”, and “Menu
screen + Color bar (horizontal)” each time you press the button.
* The test pattern built-in to the projector is not being displayed.
rr
[TEST PATTERN]
Menu screen + Focus
Displays a test pattern with the menu screen. Select a test pattern so that it is easy to
make various adjustments.
Menu screen + Entry screen
Menu screen + All white
Menu screen + All black
Menu screen + Flag
Menu screen + Flag (inversion)
Menu screen + Window
Menu screen + Window (inversion)
Menu screen + Color bar (vertical)
Menu screen + Color bar (horizontal)
Note
rf
Press the <ON SCREEN> button on the remote control while the test pattern is displayed to hide the menu screen.