Filter
Top Products
-17-
• The projector’s SSID can be up to 16 characters in length, and must
consist of capital letters (A-Z) and numerals (0-9). Accordingly, if the
SSID that has been set for the access point is invalid as an SSID for the
projector, ask your network administrator to change the access point’s
SSID to one that can be used by the projector.
• The projector is not compatible with DHCP. For LANs that use DHCP
servers, a fixed IP address needs to be assigned to the projector for it to
be used. Ask your network administrator for further details.
• If using the WEP function, communication with the projector will not be
possible. You will first need to turn off the WEP function for all computers
which are to communicate with the projector.
Furthermore, when the WEP function is turned off, the data encryption
function will also be turned off, so it is recommended that you use a
feature such as the Sharing Settings for folders to set password
protection for your data. Ask your network administrator for further
details.