Filter
Top Products
-64-
Specifications
Identical specifications appear in the separate PT-L712E Operating
Instructions, but the following should be referred to for details on
PT-L712NTE specifications.
Power supply: 100 V - 240 V ~, 50 Hz/60 Hz
Power consumption: 240 W Approx. 5 W - 10 W when in
standby mode (when fan is stopped)
Amps: 2.8 A - 1.0 A
LCD panel:
Panel size (diagonal): 0.9 type (22.86 mm)
Aspect ratio: 4:3 (16:9 compatible)
Micro lens array: Available
Display method: 3 transparent LCD panels (RGB)
Drive method: Active matrix method
Pixels: 786 432 (1024 x 768) x 3 panels
Lens: Manual zoom (1 - 1.3) / focus lens
F 1.8 - 2.1, f 28.7 mm - 36.0 mm
Lamp: UHM lamp (165 W)
Luminosity: 1600 lm/ANSI
Scanning frequency: (for RGB signals)
Internal data (point scanning) method
Horizontal scanning frequency 24 kHz - 97 kHz
Vertical scanning frequency 50 Hz - 120 Hz
Dot clock frequency 135 MHz or less
YP
B
P
R
signals: NTSC (480i), 480p, PAL (625i), 720p,
HDTV (1080i/1035i)
Colour system: 6 (NTSC / NTSC 4.43 / PAL / PAL-M /
PAL-N / SECAM)
Projection size: 762 mm - 7620 mm (30" - 300")
Throw distance: 1.1 m - 11.7 m (3'8" - 38'4")
Optical axis shift: 9:1 (fixed)
Screen aspect ratio: 4:3
Installation: Front/Rear/Ceiling/Desk (Menu
selection method)
Speakers: 2.8 cm round x 2
Max. useable volume output: 2 W (1 W + 1 W) (stereo)
Connection terminals:
RGB/YP
B
P
R
IN: Dual-line D-SUB HD 15-pin (female)
During YP
B
P
R
input:
Y: 1.0 V [p-p] (including sync signal),
75 Ω
P
B
,P
R
: 0.7 V [p-p], 75 Ω