Filter
Top Products
-38-
Make the following settings.
#
##
# Select Setting
If creating several network
settings, use the G button to
select a setting.
$
$$
$ Setting Name
Lets you type a name for the
network setting.
(Example) LAN1
%
%%
% Create
Creates a new network setting.
&
&&
& Delete
Deletes the currently-displayed network setting.
(
((
( Copy
Creates a new network setting and copies the contents of the
currently-displayed network setting to the new setting.
)
))
) NIC (Network Interface Card)
Selects the wireless card to be used.
*
**
* LAN card’s number
Type in the last digit of the product number for the wireless card that
you are using (see page 5).
TCP/IP
+
++
+ Use DHCP
Select if you would like to assign an IP address so that the computer
can use a DHCP server.
-
--
- IP address
Type in the computer’s IP address. The computer’s IP address cannot
be the same as the projector’s IP address or another computer’s IP
address.
Refer to page 14 of “Wireless function preparation” while making this
setting.
.
..
. Subnet Mask
Type in the subnet mask.
Refer to page 14 of “Wireless function preparation” while making this
setting.
/
//
/ Gateway
Type in the gateway address.
This setting is not required for communication with the projector.
This setting is not compatible with the metric settings for Windows 2000.
If metric settings are required, make the setting using the “Advanced
TCP/IP settings” window in Windows 2000.