Filter
Top Products
-37-
You can start the Wireless Manager by clicking
“Start”, pointing to “Programs”, pointing to
“Wireless Manager” and then click the
“Wireless Manager”. When the Wireless
Manager starts, an icon appears on the taskbar
at the bottom-right corner of the screen.
• If you right-click on the icon on the taskbar,
a menu appears. Select an item in the
menu and click the left mouse button to
display the respective window.
• To close the Wireless Manager, choose
“End”.
Computer network settings
The computer’s network settings must be correct in order to be able to
send images to the projector. Multiple network setting values can be stored.
When TCP/IP settings are made or changed, it is sometimes necessary to
restart the computer before they can take effect.
Wireless Manager cannot be used to change the settings if
you are using a wireless card other than the optional
ET-CDWL1 series card. You will need to use the software that
is supplied with the wireless card in order to change the
settings.
Right-click on the icon in the taskbar, select
“Option” to display the Option window, and
then select “SETTING NETWORK”.