Filter
Top Products
ENGLISH-21
Getting started
20ENGLISH
Example of connecting to computer
NOTE:
BIt is better to shut down the computer before turning off the MAIN
POWER switch of the projector.
BDo not input the signal to the RGB2 IN/RGB1 OUT connector when the
RGB2 SELECT item in the OPTION menu is set to “OUTPUT”. (Refer
to page 45.)
NOTE:
B
If the video signal source is connected using a cable with a BNC connector plug, use a
BNC/RCA adapter (sold separately) to convert the cable end to an RCA plug-type jack.
BIf the signal cables are disconnected or if the power supply for the
computer or video deck is turned off while the digital zoom function is
being used, this function will be cancelled.
Connections
Notes on connections
B
Read the instruction manual for each system component carefully before connecting it.
B
Turn off the power supply for all components before making any connections.
B
If the cables necessary for connecting a component to the system are not included with the component
or available as an option, you may need to fashion a cable to suit the component concerned.
B
If there is a lot of jitter in the video signal which is input from the video source, the picture on the
screen may flicker. In such cases, it will be necessary to connect a TBC (time base corrector).
B
Refer to the list on page 62 for details on compatible signals which can be input to the projector.
B
Only one audio system circuit is available for each of the AUDIO IN L-R jacks for
S-VIDEO/VIDEO signals and the RGB AUDIO IN jack, so if you wish to change
the audio input source, you will need to remove and insert the appropriate plugs.
Example of connecting to video equipments
D-sub 15 (male) - BNC5 (male)
adapter cable
Red (connect to PR signal connector)
Blue (connect to PB signal connector)
Green (connect to Y signal connector)
DVD player
D-sub 9-pin
(male)
DVD player
Audio system
Video deck
Computer for
control use
1 62345
ON DIP
D-sub 9-pin
(male)
Computer for
control use
Computer
Monitor
Audio system
Refer to the accessory CD-ROM for details on the wireless network
that is used for controlling the projector with a personal computer
by means of the wireless card. (PT-L735NTE only)