Filter
Top Products
ENGLISH-29
Useful functions
28-ENGLISH
Turning off the picture and sound
momentarily (SHUTTER)
The shutter function can be used to momentarily turn off the picture and
sound from the projector when the projector is not being used for short
periods of time, such as during breaks in meetings or when carrying out
preparation. The projector uses less power in shutter mode than it does in
normal projection mode.
Still picture
BThe picture being projected will be paused.
BPress the FREEZE button again to cancel the
still picture.
Press the SHUTTER button.
BThe picture and sound will be turned off.
BPress any button on either the projector or
remote control unit to return to normal operating
mode.
Press the FREEZE button.
Pausing a picture (FREEZE)
Computer
ENTER
R-CLICK
FREEZE
SHUTTER
Projector
FUNC1
STD
SHUTTER
Computer
ENTER
R-CLICK
FREEZE
SHUTTER
Projector
FUNC1
STD
FREEZE
BThe picture will then
be enlarged to 1.5
times the normal size.
The remote control unit functions during D.ZOOM (digital zoom)
Use the
F
,
G
,
I
and
H
buttons to move the enlarged area which you want to project.
Use the D.ZOOM +/- buttons to change the enlargement ratio.
Press the MENU button to return to the normal screen.
[
Enlarging the picture (D.ZOOM)
Adjusting the volume (VOLUME)
Press a D.ZOOM +/- button.
Press the VOLUME +/- button.
BPress the + button to raise the volume.
BPress the - button to lower the volume.
NOTE:
B
The enlargement ratio can be changed within the range of x1 to x4, by 30 steps.
BIf the type of signal being input changes while the digital zoom function
is being used, the digital zoom function will be cancelled.
NOTE:
BYou can also select “VOLUME” from the
AUDIO menu to adjust the volume.
LASER
MENUVIDEO
PAGE
ENTER
R-CLICK
FREEZE
SHUTTER
FUNC1
STD
RGB
POWER
AUTO SETUP
Computer
FREEZE
SHUTTER
Projector
FUNC1
STD