Filter
Top Products
ENGLISH-17
Preparation
16-ENGLISH
(PT-L735NTE only)
Wireless card SD memory card
$
%
#
LOCK
'
&
Front Back
#Connector
This connector is for connecting
the wireless card to the
projector’s card slot. Be careful
not to touch the connector.
$Wireless card power indicator
Illuminates when the wireless
card is operating.
%Wireless card access indicator
Flashes while the projector is
being accessed with personal
computers by means of a
wireless network.
&Metal terminals
These terminals are for
connecting the SD memory card
to the projector’s card slot. Do not
touch the metal terminals with
hands or metal objects, attach
stickers to them, or allow them to
become contaminated in any way.
'Write-protect switch
If the write-protect switch on the
SD memory card is moved to the
LOCK position, it will not be
possible to use any file editing
functions such as deleting or
moving image files.
Inserting the wireless card (PT-L735NTE only)
Insert the wireless card before using the PT-L735NTE.
Hexagon wrench
(accessory)
%
#
$
Eject switch
Card lock fixing
screw
#
Insert the wireless card until it locks.
$Set the accessory card lock.
%Fasten the card lock with the card
lock fixing screw using the
hexagon wrench.
The card lock is already installed at
the factory default setting. When
you insert the wireless card, first
remove the card lock fixing screw
using the hexagon wrench to
release the card lock.
BWhen removing the wireless card, remove the card lock, and then press
the eject switch.
Card lock
Connector panel
#USB port
(page 31)
The remote control unit can be
used as
a personal computer
mouse by connecting the
projector to
a personal computer
with the supplied USB cable.
(4-pin square connector)
$SERIAL connector
(pages 20, 21 and 64)
This connector is used to connect
a personal computer to the
projector in order to externally
control the projector. (RS-232C
compatible)
%RGB1 IN connector
(pages 20 and 21)
This connector is used to input
RGB signals and YP
BPR signals.
&RGB2 IN/RGB1 OUT connector
(pages 20, 21 and 45)
This connector is used to input or
output RGB signals and YP
BPR
signals. Use the RGB2 SELECT
item in the OPTION menu to
select whether you want input or
output with this connector.
'AUDIO OUT jack
(pages 20 and 21)
This jack is used to output the
audio signals which are input to
the projector. If audio equipment
is connected to this jack, no
sound will be output from the
built-in speaker.
(RGB AUDIO IN jack
(pages 20 and 21)
Only one system is provided, so
connect the appropriate
connector when using RGB1 or
RGB2.
)S-VIDEO IN connector
(pages 20 and 43)
This connector is used to input
signals from a S-VIDEO-compatible
equipment such as a video deck.
*VIDEO IN jack
(page 20)
This jack is used to input video
signals from a video equipment
such as a video deck.
+AUDIO IN L-R (for VIDEO/S-
VIDEO) jacks
(page 20)
Only one system is provided, so
connect the appropriate
connector when using VIDEO or
S-VIDEO.
# $ % &
*
( )
'
+