Panasonic TQBJ0299-3 Projector User Manual


 
DISPLAY OPTION menu
ENGLISH - 27
Settings
You can choose a blank screen colour for when the projector is
idle. Press I H to select the required option.
You can switch the logo on/off that is displayed when starting
up the projector. Press I H to select the required option.
STARTUP LOGO will be displayed for 30 seconds.
Press the ENTER button to capture the image, and you can
see it as a still picture while the AV equipment are continuing.
Press the ENTER button to escape and return to the continuing
image.
(PT-DZ6710/PT-DZ6700/PT-DW6300 only)
You can project the image and another source of image at the
same time in double window style.
1. Press the ENTER button.
Displays the main image on the left, sub image on the right.
2. Press the MENU button.
Displays the sub menu with current displayed signal
information.
3. F G to select the sub image signal and press the
ENTER button.
Select OFF to escape from the SIDE BY SIDE mode. To
enter the SIDE BY SIDE mode again, select SIDE BY SIDE
of the menu.
BACK COLOR
BLACK Displays black pattern.
BLUE Displays solid blue.
LOGO1 Displays user defined image.
LOGO2 Displays PANASONIC logo.
NOTE:
Special software is required to define the LOGO1 image.
Contact to an Authorised Service Centre.
STARTUP LOGO
LOGO2 Displays PANASONIC logo.
NONE Deactive
LOGO1 Displays user defined image.
NOTE:
Special software is required to define the LOGO1 image.
Contact to an Authorised Service Centre.
FREEZE
SIDE BY SIDE
NOTE:
FREEZE control is available with the first image only.
•While SIDE BY SIDE is activated, ZOOM and AUTO SETUP
are not available.
•While SIDE BY SIDE is activated, the main menu will not be
displayed.
The second image will apply to the value of the PICTURE
settings of the first image except CONTRAST and
BRIGHTNESS.
COMPUTER and NETWORK signals will not keep the
adjusted aspect ratio.
Some combination of the signals are not available. See “SIDE
BY SIDE function signal combination table” on page 48.
Main image
Main image
Sub image