Panasonic TQBJ0299-3 Projector User Manual


 
ENGLISH - 37
Settings
NETWORK menu
Make the initial network settings before using the network
connection.
1. Select the required item to change.
2. Press the ENTER button.
3. Use F G I H to change the settings.
4. Select STORE and press the ENTER button.
The confirmation screen will be displayed. Select OK and
press the ENTER button.
You can switch on/off the projector network controlling method.
1. Select the required item to change.
2. Press the ENTER button.
3. Use I H to change the settings.
4. Select STORE and press the ENTER button.
The confirmation screen will be displayed. Select OK and
press the ENTER button.
You can display the current network status of the projector.
Press the ENTER button to display.
DHCP
IP ADDRESS
SUBNET MASK
DEFAULT GATEWAY
DNS1
DNS2
MAC ADDRESS
NETWORK SETUP
HOST NAME
Change as needed when using a
DHCP server.
DHCP
ON: When using DHCP server,
automatically acquire an IP
ADDRESS.
OFF: IP ADDRESS need to be
entered manually.
IP ADDRESS
Enter correct IP ADDRESS numbers.
When DHCP is ON, automatically
filled.
SUBNET MASK
Enter correct SUBNET MASK
numbers. When DHCP is ON,
unnecessary to fill.
DEFAULT GATEWAY
Enter correct DEFAULT GATEWAY
numbers. When DHCP is ON,
unnecessary to fill.
STORE Save the above settings.
NOTE:
Make sure the DHCP server is ready to use.
For details of IP ADDRESS, SUBNET MASK and DEFAULT
GATEWAY, ask the network administrator.
Remote control
See “Navigating through the menu” on page 15.
See “Main menu and Sub-menu” on page 12.
NETWORK CONTROL
WEB CONTROL
For when controlling from a computer
with the web browser.
PJLink CONTROL
For when controlling from a computer
with the PJLink
TM
protocol.
COMMAND CONTROL
*1
*1. If settings have been made without an administrator
password of the web browser control, add 2-byte “00”
instead of STX, and a line-feed code (0Dh) instead of
ETX.
If settings have been made with an administrator
password, of the web browser control, add a 32-byte hash
value and “00” instead of STX and a line-feed code (0Dh)
instead of ETX.
The hash value is created by MD5 combining “admin1:”,
password, “:” and random numbers. The random numbers
are 8-byte values sent from the projector when
connecting.
For when controlling from a computer
via SERIAL terminal.
COMMAND PORT
Enter the command port number for
COMMAND CONTROL.
STORE Save the above settings.
NETWORK STATUS