36
SIZE FUNCTION
The character size of the entire text can be adjusted using the size function. Since the
character size that can be used depends on the width of the tape, the following table shows
the character sizes that can be used with each tape width.
The default size setting is AUTO . The currently selected size setting is always shown by the
indicators at the top of the display.
With the AUTO size setting, the machine compares your text with the width of the installed
tape and automatically adjusts the characters to the largest size possible. However, six other
point si zes are also available.
☞ If the AUTO size setting is selected and only one line of characters has been entered,
the text can be printed with a character size slightly larger than the maximum for the
installed tape under any of the following conditions.
Tape width Sizes (in points)
1/4" (6 mm) 12, 9
3/8" (9 mm) 18, 12, 9
1/2" (12 mm) 24, 18, 12, 9
3/4" (18 mm) 36, 24, 18, 12, 9
Setting
(in points)
Size
36
ABC
24
ABC
18
ABC
12
ABC
9
ABC
6
ABC
• Only font
available for
Rotate d Tex t ON.