65
TROUBLESHOOTING
Problem Remedy
1. The printer is asking for
“LABEL CODE”.
• Enter LABEL CODE printed on tape cassette.
2. The display stays blank
after you have turned on
the machine.
• Check that the correct AC adapter (LS7-ACS) is
being used and that it is connected correctly.
• If you are using alkaline batteries, check that they
are correctly inserted.
• If the batteries are low, replace them with new
ones.
3. The machine does not print
or the printed characters
are blurred.
• Check that the correct AC adapter (LS7-ACS) is
being used and that it is connected correctly.
• Check that the tape cassette has been inserted
properly.
• If the tape cassette is empty, replace it with a new
one.
• Make sure that the back cover has been attached.
4. The text files that you
stored in the memory are
no longer there.
• If the batteries are low, replace them with new
ones.
5. The printed characters are
not formed properly.
• If you are using alkaline batteries, they may be
low. Try using the AC adapter or replace the
batteries with new ones.
• Check that the correct AC adapter (LS7-ACS) is
being used and that it is connected correctly.
6. A blank horizontal white
line appears through the
printed label.
• Clean the print head as explained on page 13 and
14.
7. Striped tape appears. • You have reached the end of the tape.
Replace the tape cassette with a new one.
8. The machine has “locked
up” (i.e., nothing happens
when a key is pressed).
• Turn off the machine, and then while holding
down and , turn the machine back
on. WARNING: The text in the display, all format
settings, and all text files stored in the memory are
erased.
Code
Clear
BS