Panduit LS7 Printer User Manual


 
55
MEMORY FILE FUNCTIONS
You can use the memory to store your most frequently used text files. The text remains in the
memory, even after all characters are removed from the display using the clear function (see
page 29).
When a file is stored, it is given a number to make recalling it easier. A maximum of 9 text
files or about 300 characters can be stored in the memory. A stored text file can contain a
maximum of 99 characters.
Since a copy of the stored text file is recalled when the recal l function is used, the text can be
edited or printed without changing the originally stored file. When a file is no longer needed
or more space is necessary, the memory delete function can be used to delete it.
When inserting new batteries, be sure to insert the new ones within five minutes of
removing the old ones, otherwise any text files stored in the memory will be lost
(unless the machine is plugged into an electrical outlet with the AC adapter).
STORING TEXT
To store a text file:
1 Hold down and press .
2 Press or until STORE flashes on the display.
3 Press . The message STORE SELECT 1–9?” appears on the display.
4 Press the key ( to ) of the file number where you wish to store the text. The
text is stored under the selected file number and the text previously shown in the dis-
play reappears.
If a file is already stored under the selected file number, the message OVER-
WRITE?” appears in the display and you must decide whether or not to over-
write it (delete it from the memory and store the new one).
If 300 characters have already been stored, the error message “MEMORY FULL!
appears in the display. If this occurs, an existing text file must be deleted before the
new one can be stored.
To quit the store function without storing the text, hold down and press
(or press just ).
Code
File
File
1
Size
9
Frame
Code
File
Clear
BS