Filter
Top Products
1. Installation
4821-A2-GN21-10 July 2004
1-3
Cables Required
Table 1 -2 shows all the cables that may be required for your installation.
Table 1-2. Cable Descriptions
Connector Name Connector and Cable For Connecting . . .
DSL PORTS 1–24
DSL Ports 25–48
(if installed)
50-pin RJ21X Telco-type
straight connector and 50-wire
cable. Two cables required for
48-port model.
Up to 24 DSL ports per cable to
a POTS splitter.
Port 2
10/100BaseT
8-position modular plug and
8-wire Category 5 or better
unshielded twisted pair (UTP)
cable.
The BitStorm 4800 Express to a
network.
Port 1
10/100BaseT
8-position modular plug and
8-wire Category 5 or better
unshielded twisted pair (UTP)
cable.
A Network Management System
(NMS) over a Local Area
Network (LAN) employing
10BaseT or 100BaseT.
CONSOLE DB9 plug connector and
shielded cable.
The other connector
depends on the serial port on
your terminal or PC, but
normally is a DB9 socket.
The other connector
depends on the serial port on
your modem, but normally is
a DB25 plug. A null modem
(crossover) cable is required.
The BitStorm 4800 Express to
one of the following:
A terminal or a PC with a
terminal emulation program,
or
A modem.