Filter
Top Products
2. Cabling
2-8 July 2004 4821-A2-GN21-10
Connecting to Power
The BitStorm 4800 Express can be powered by any AC power source supplying
90–265 VAC at 47–63 Hz.
Procedure
To connect the BitStorm 4800 Express to a power source:
1. Insert the supplied power cord into the power socket on the back of the unit.
2. If the BitStorm 4800 Express is in a rack, dress the power cord to the left and
fasten it to the rail with a cable tie.
3. Connect the other end of the power cord to a grounded AC power source.
4. Make sure the STATUS LED on the front panel is ON (green). See Chapter 3,
LEDs.
02-17248