Filter
Top Products
4. Configuration
4821-A2-GN21-10 July 2004
4-3
Configure Management Inband Address
The configure management inband address command specifies the IP address
of the unit.
Configure Management Out-of-Band Address
The configure management out-of-band address command specifies the IP
address of the unit that will accept management traffic on the out-of-band
management port.
configure management inband address {ip_address} { subnet_mask}
Minimum Access Level: Administrator
ip_address – Specifies the management IP address. Default is 0.0.0.0 (disabled). Do
not configure inband and out-of-band management on the same subnet.
subnet_mask – Specifies the subnet mask to be applied to the IP address. The default
mask is 255.255.255.0.
Example:
PDYN# configure management inband address 137.90.127.3
255.255.255.0
configure management out-of-band address {bootp | {{ip_address} {
subnet_mask} }
Minimum Access Level: Administrator
bootp – Specifies that a BOOTP server will determine the management IP address.
ip_address – Specifies the management IP address. The default address is
10.10.10.10. Do not configure inband and out-of-band management on the same
subnet.
subnet_mask – Specifies the subnet mask to be applied to the IP address. The default
mask is 255.255.255.0.
Example:
PDYN# configure management out-of-band address bootp
PDYN# configure management out-of-band address 137.90.127.3
255.255.255.0