Filter
Top Products
3. DSL Card Configuration
8000-A2-GB26-50 April 2001
3-7
Download Code (Download Code and Apply Download) A-A-F (A and B)
Provides the ability to download a new version of code and apply the downloaded code.
For further information on this feature, see Appendix A,
Download Code
.
Select
Download Code (A)
or
Apply Download (B)
.
You must exit this screen and use
the Apply Download screen.
Download Code (A)
Allows code download. This screen is similar to the NVRAM Configuration Loader screen
(
A-A-D
).
Image File Name
– The file name may be a regular path name expression of directory
names separated by a forward slash (/) ending with the file name. The total path name
length must be less than 40 characters. If the TFTP server is hosted by a DOS machine,
then directory and file names must follow the 8.3 naming convention imposed by DOS.
TFTP Server
– Enter the host name of the TFTP Server or its IP address in
nnn.nnn.nnn.nnn
format. This address must be in the management domain. Enter M1 if
the configuration file is stored in the file system of the MCC card.
Start Transfer
– Yes/No (Default = No).
Statistics:
Packets Sent
– Number of packets sent in download.
Packets Received
– Number of packets received in download.
Bytes Sent
– Number of bytes sent in download.
Bytes Received
– Number of bytes received in download.
Transfer Time
– The length of time the transfer is taking.
Status
– The progress of the file transfer.
Once the download is complete, press Ctrl-z to exit back to the Download Code submenu
and select Apply Download (
A-A-F-B
) for the download to take effect.
Apply Download (B)
This selection applies the downloaded code and drops all connections by performing a
device reset. This screen is used to overlay a recently downloaded image onto the
working image for the card. If you select yes at the Reset System prompt, the system
goes through a system restart and interrupts service on the card. For further information
on this feature, see Appendix A,
Download Code
.
NOTE: If you have not previously downloaded code, then you will not be able to
access this selection.
Table 3-1. Card Options (3 of 3)