Filter
Top Products
4. Monitoring the Hotwire DSL System
8000-A2-GB26-50 April 2001
4-21
DSL Monitoring Filters Screens
Use the Filters screens to display configured IP and Ethertype filter information.
Procedure
1. Follow this menu selection sequence:
Monitoring
→
Filters
(
B-G
)
2. The Filters menu appears. Select the option as shown in Table 4-6, Filters.
Table 4-6. Filters (1 of 2)
IP Filter Table (B-F-A)
The IP Filter Table screen displays the status of the IP filter.
Item #
– Enter the item to display.
Filter Name
– Name of the IP filter.
# Rules
– Number of rules in filter.
Def. Filter Action
– Forward/discard.
VNID
– Interface and VNID to which the filter belongs.
Interface
– DSL interface to which the filter belongs (for example, dsl1:1 through dsl12:1
for 12-port cards).
Filter Status
– Active/Inactive.
Direction
– Inbound/Outbound.
NOTE: To view the filter rules, you must have Administrator level access and use the
Configuration Menu (
A-G-A
). Refer to Table 3-6, Filters Options, in Chapter 3,
DSL
Card Configuration.