Filter
Top Products
4. Monitoring the Hotwire DSL System
8000-A2-GB26-50 April 2001
4-3
Table 4-1. Card Options
Card Info (General Card Information) B-A-A
Displays card information.
Card Name
– Name assigned to the card.
Card Location
– Physical location of the system.
Card Contact
– Name or number of the person responsible for the card.
Time/Date
– Current time and date for the card.
Timezone
– Time zone for the card.
Card Up Time
– Length of time the card has been running.
Buffer Info
– Number of Buffers free, used, allocated and available.
Buffer Ram Size
– Size of the Buffer Ram.
Fast Data Ram Size
– Total and Available Fast Data Ram.
Card Type
– Type of Card (MCC, DSL).
Model Num
– Model number of card.
Serial Num
– Serial number of card.
Firmware
– Version of firmware.
CAP Firmware
– Version of GlobeSpan chipset (for RADSL and SDSL cards only).
MVL Firmware
– Version of DSP chipset (for MVL cards only).
ReachDSL Rel
– Version of ReachDSL firmware (for ReachDSL/MVL cards only).
IUT Revision
– Version of the ISDN U-Interface Transceiver (for IDSL cards only). A valid
revision is displayed only if all 24 ports contain the same type of device. If one or more
ports differ, UNKN is displayed.
Hardware Rev
– Version of hardware.
Login History B-A-B
Refer to the
Hotwire Management Communications Controller (MCC) Card, IP
Conservative, User’s Guide
for information.
Syslog (System Log) B-A-C
Displays a time-stamped sequential list of operational type errors by date and error. There
is one logged error per line in a downward scrolling list of over 100 possible entries. The
following navigational tools are provided:
Newest – Jump to newest entry in log
Oldest – Jump to oldest entry in log
Up – Move forward (toward newest entries) by one page
Down – Move back (toward oldest entries) by one page
When the log is full, the oldest entry is deleted. Refer to the following SYSLOG Screen
Example
.
See
Chapter 5, Diagnostics and Troubleshooting,
for SYSLOG error message
information.