Filter
Top Products
MCC Card Configuration
5-8
8000-A2-GB20-20
November 1997
MCC Configuration IP Router Screens
Use the system information submenu of the IP Router screens to configure static
routes to protocols and filters.
" Procedure
To configure static routes, martian networks, and IP router filters:
1. Follow this menu sequence:
Configuration
→
IP Router
(A-E)
2. The IP Router menu appears. Enter the desired value on each selected
screen and field as shown in Table 5-4 and press Return.
Table 5-4. IP Router Menu Options (1 of 4)
Static Routes A-E-A
Gives the user the ability to add or delete static routes in the system. You can add up to
32 static routes.
Item – Press Return on 0 field to add entry.
Host/Net –
nnn.nnn.nnn.nnn
format or space to delete entry. This field is read only for
dynamic routes.
Subnet Mask – Associated subnet mask for the specified destination IP address. This
field is read only for dynamic routes.
Next Hop –
nnn.nnn.nnn.nnn
format. This field is read only for dynamic routes.
Pref– Measure of how preferable one route is to another, if you have two routes going
to the same destination. (The lower the number, the more preferable.) This route is
compared to others for the same address. This field is read only for dynamic routes.
S/D (Source/Destination) – Source or destination IP address of the packet. This field is
read only for dynamic routes.
PA (Proxy ARP) – Router answers ARP requests intended for another machine. This
field is read only for dynamic routes.
NOTE: When you define a source route, the Proxy ARP field is no longer
selectable.
Martian Networks A-E-B
Gives the user the ability to enter addresses that the system recognizes as invalid.
Item – Press Return on 0 field to add entry.
Martian Net ID –
nnn.nnn.nnn.nnn
format or space to delete entry. Enter IP address of
unwanted source.
Martian Net Mask –
nnn.nnn.nnn.nnn
format. Enter IP mask of unwanted source.
NOTE: The system is shipped with default martian networks. It is recommended
that you do not remove entries. If you have made changes to this screen,
you must do a card reset.