Filter
Top Products
Monitoring the HotWire DSLAM
7-7
8000-A2-GB20-20
November 1997
Table 7-4. Network Protocol Options (2 of 6)
UDP Statistics B-D-B
Displays information on UDP statistics such as input packets, output packets, packets
with checksum errors, bad length packets, and other information on all interfaces.
The counters increment in real time and you may enter Ctrl-r at any time to reset the
counters.
Output Packets – Number of UDP packets sent out of the card.
Input Packets – Number of UDP packets coming into the card.
No receive port – Number of UDP packets coming into the card that had no receive
port waiting for this packet.
Unchecksummed – Number of UDP packets coming into the card that had no
checksum.
Header Error – Number of UDP packets coming into card that had an error with the
packet header.
Incorrect Checksum – Number of UDP packets coming into the card that had a bad
checksum.
Bad length – Number of UDP packets coming into the card that are an illegal length
(too short).
Other Error – Number of UDP packets coming into the card that had an error, but not
one of the above.