Filter
Top Products
DSL Card Configuration
6-10
8000-A2-GB20-20
November 1997
Table 6-3. Interfaces Options (3 of 3)
PPP A-C-D
Gives the user the ability to configure parameters for the PPP links used for the DSL
connections. For the 8540, there is no PPP submenu.
Interface Name – s1c, s1d, s1e, or s1f.
Restart Timer – 1–10000 in seconds (Default = 3).
Max Terminates – (Default = 2).
Max Configures – Maximum number of PPP links (Default = 10).
Max Naks – Maximum number of negative acknowledgments before PPP link goes
down (Default = 10).
Negotiate Options
The following values should not be changed:
MRU: no
ACCM: no
MAGIC: no
Quality: no
PFC: no
ACFC: no
Option Values
Local MRU (max) – 64–64000 bytes (Default = 1500)
ACCM: Default = FFFFFFFF
LQR Freq: Default = 10
Link Options
Trace: on/off/raw/decode (Default = off). This field is for field service use only and
should not be turned on.
Echo Probe: yes/no (Default = no)
Option Values
Echo Freq: Default = 10
Echo Policy: Default = 5
NOTE: While most of the fields on this screen are pre-populated, the values can be
changed.