Filter
Top Products
2. Hardware Installation and PC Setup
6388-A2-GB20-00 February 2005
2-5
5. In the Internet Protocol (TCP/IP) Properties dialog box, click in the radio button
labeled “Use the following IP address” and type 192.168.1.x (where x is any
number between 2 and 254) in the IP Address field. Type 255.255.255.0 in the
Subnet Mask field.
Figure 2-4. TCP/IP Properties in Windows XP
6. Click on OK twice to confirm your changes, and close the Control Panel.
Windows 2000
To configure the IP address under Windows 2000:
Procedure
1. In the Windows task bar, click on the Start button, point to Settings, and then
select Control Panel.
2. Double-click on the Network and Dial-up Connections icon.
3. In the Network and Dial-up Connections window, right-click on the Local Area
Connection icon, and then select Properties.
The Local Area Connection Properties dialog box is displayed with a list of
currently installed network components. If the list includes Internet Protocol
(TCP/IP), the protocol has already been enabled, in which case you can skip
to Step 10.