Filter
Top Products
3. Using the Web Interface
3-42 February 2005 6388-A2-GB20-00
the address of the RADIUS server, the Port, the shared Secret, and the
Interval in seconds at which authentication must be repeated.
Figure 3-37. Wireless Security 802.11x Screen
— WPA (Wi-Fi Protected Access). For WPA you can specify a RADIUS
server (as with 802.1x, above) or a Pre-Shared Key (PSK).
Figure 3-38. Wireless Security WPA Screen
The Apply button will temporarily save these settings. To make the change
permanent, click on Tools (at the top of the page) and select System Commands.
At the System Commands page, click on Save All. Then turn off and turn on the
router to put the settings into effect.