Filter
Top Products
3. Using the Web Interface
3-24 February 2005 6388-A2-GB20-00
SNTP
The SNTP screen lets you specify parameters related to SNTP (Simple Network
Time Protocol) servers. To use SNTP:
Procedure
1. From the Home screen, click on Advanced and under Advanced, select SNTP.
The SNTP screen appears.
2. Enable SNTP and then specify one or more SNTP servers.
3. The Apply button will temporarily save these settings. To make the change
permanent, click on Tools and select System Commands. On the System
Commands page, click on Save All.
Figure 3-19. SNTP