Filter
Top Products
9
About this guide
This guide describes how to install a Patton OnSite Series Model 1052 and1063 Metro-Optical Transport
Access Node. For detailed configuration and management instructions, refer to the
OnSite 1052 & 1063 Series
Administrator’s Reference Guide
, which is located on the CD-ROM that came with your unit and at www.pat-
ton.com.
Installation, maintenance, and removal of a chassis or its components must be done by qualified service per-
sonnel only. Qualified service personnel have had appropriate technical training and experience that is neces-
sary to be aware of the hazards to which they are exposed when performing a task and of measures to minimize
the danger to themselves and other people.
You should consider the following before unpacking your equipment:
• Install the equipment in a secured, enclosed, and restricted access area, ensuring that only qualified service
personnel have access to the equipment.
• Install the equipment only in a temperature and humidity-controlled indoor area that is free of airborne
materials that can conduct electricity.
• When you handle equipment that has expansion modules, put on the electrostatic discharge (ESD) wrist
strap to reduce the risk of electronic damage to the equipment.
Note
Leave the ESD strap permanently attached to the chassis or rack so
that it is always available when you need to handle ESD-sensitive
components.
Audience
This guide is intended for the following users:
• Operators
• Installers
• Maintenance technicians
Read the following safety information thoroughly before installing your OS-
10 system. Failure to follow this safety information can lead to personal
injury or damage to the equipment.
WARNING