Filter
Top Products
12
The
terminal block connector
on the VLINK modem's twisted pair inter-
face
is polarity insensitive
and is wired for a two-wire interface. The
signal/pin relationships is shown in Figure 5.
Figure 5.
VLINK modem (terminal block version) twisted pair line interface.
3.4 CONNECTING THE 10/100BASE-T ETHERNET INTERFACE
The shielded RJ-45 port labeled
Ethernet
is the 10/100Base-T interface.
This port is designed to connect directly to a 10/100Base-T network.
Figure 6 shows the signal/pin relationships on this interface. You may
connect this port to another Ethernet device via a Type 4 or Type 5 cable
that is up to 328 ft long.
Figure 6.
VLINK modem 10/100Base-T RJ-45 Connector Pinout.