Filter
Top Products
7
2.0 GENERAL INFORMATION
Thank you for your purchase of this Patton Electronics product. This
product has been thoroughly inspected and tested and is warranted for
one year for parts and labor. If any questions or problems arise during
installation or use of this product, contact Patton Electronics Technical
Support at +1 (301) 975-1007.
2.1 FEATURES
• Easy to install standalone VLINK modems (no configuration required)
• Auto-sensing full or half-duplex Ethernet
• Auto-sensing 10/100Base-T
• Extends network connections up to 6,000 ft (1.83 km) over 2-wire 24-
AWG unconditioned lines
• Switch selectable line rates up to 16.67 Mbps (Model 1068 only)
• 7 symmetric or asymmetric settings via DIP switch (Model 1068 only)
• POTS/ISDN splitter on board
• Transparent operation
• LED indicators for Power, Ethernet Link & Activity, VLINK link & Quality of
Line (QOL)
• Surge suppression up to 20 kA (8/20
µ
s)
• Available in rack-mount or standalone configurations
• Made in the USA
2.2 DESCRIPTION
The Patton Electronics VLINK/CO* and VLINK/CP VDSL* modems pro-
vide high-speed LAN connections between peered Ethernet LANs,
remote PCs, or any other network enabled 10/100Base-T device.
Operating in pairs, a VLINK/CO (central office) located at one end of the
LAN extension and a VLINK/CP (customer premise) at the other end,
these units can automatically forward LAN broadcasts, multicasts, and
frames across a 2-wire voice-grade twisted-pair link. The data is passed
* Only Models 1058/1068DV/CO and 1058/1068DV/CP have
POTS/ISDN splitters on board.