Filter
Top Products
5
1.3 FCC PART 68 (DV VERSION ONLY)
This equipment complies with Part 68 of the FCC Rules. Please note the
following:
This equipment complies with Part 68 of FCC rules and the requirements
adopted by ACTA. On the, bottom side of this equipment is a label that
contains, among other information, a product identifier in the format US:
AAAEQ##TXXXX. If requested, this number must be provided to the
telephone company.
• Universal Service Order code (USOC) jack: RJ-11C
• Facility Interface Code: 02LS2
• Service Order Code (SOC): 9.0F
• REN No.: 0.2
A plug and jack used to connect this equipment to the premises wiring
and telephone network must comply with the applicable FCC Part 68
rules and requirements adopted by the ACTA.
The REN is used to determine the number of devices that may be con-
nected to a telephone line. Excessive RENs on a telephone line may
result in the devices not ringing in response to an incoming call. In most
but not all areas, the sum of RENs should not exceed five (5.0). To be
certain of the number of devices that may be connected to a line, as
determined by the total RENs, contact the local telephone company. The
REN for this product is part of the product identifier that has the format
US:AAAEQ##TXXXX. The digits represented by ## are the REN without
a decimal point (e.g., 03 is a REN of 0.3).
Caution
The Model 1058/1068D is not intended to be connected
to the public telephone network.
Caution
The VLINK modem port is not intended to be connected
to the public telephone network. The 1058/1068DV con-
tains a POTS/ISDN connection that can be connected to
the public telephone network.