Patton electronic 1082 Network Card User Manual


 
20
The Model 1082 powers up as soon as it is plugged into an AC outlet--
there is no power switch.The Universal AC supply is equipped with a
male IEC-320
DC Power
The 36-60 VDC DC to DC adapter supplied with the DC version of the
Model 1082 plugs in a DC source (nominal 48VDC) and plugs into the
barrel power supply jack on the rear of the 1082. Refer to Figure 11 to
make the proper connection.
Figure 11.
Connecting DC power to the 48V-PSM DC power supply
z
WARNING
There are no user-serviceable parts in the power supply
section of the Model 1082. Fuse replacement should only
be performed by qualified service personnel. Contact
Patton Electronics Technical support at +1 (301) 975-1007,
via our web site at www.patton.com, or by E-mail at
support@patton.com, for more information.
To Power
Supply Jack
To -48VDC
Source
-Vin
+Vin