Filter
Top Products
Preparing the RAS for configuration 39
Model 3125 RAS Getting Started Guide 3 • Configuring the RAS for operation
Figure 20. Login window
5. Type superuser as the default username and password, then press <RETURN>. The Top Level Man-
agement window displays (see figure 21).
Figure 21. VT-100 Top Level Management window
6. Select option g Ethernet.
7. Select a PrimaryIpAddress to set the Ethernet A IP address.
8. Type the IP address at the > prompt, then press <RETURN>.
9. Use the left arrow key to return to the previous menu.
10. Select b PrimaryIpMask to set the Ethernet A IP subnet mask.
11. Type the IP netmask at the > prompt, then press <RETURN>.
12. Select d PrimaryIpAddress to set the Ethernet B IP address.
13. Type the IP address at the > prompt, then press <RETURN>.
14. Use the left arrow key to return to the previous menu.
15. Select e PrimaryIpMask to set the Ethernet B IP subnet mask.