Filter
Top Products
9
The Model 3088 provides the following parameters for configuring
the unit.
Parameter Description
Possible
Values
Default
Value
Password The password used to login
to the console.
Character
strings 1–9
characters
long.
patton
Circuit ID The circuit ID used to identify
the unit.
Character
string 1–64
characters
long.
Patton
Model
3088
Front Panel
Switches
If the unit is populated with
front panel switches, they can
be used to start and stop test
modes. If they are disabled,
however, the front panel
switch settings will be
ignored.
Enabled or
Disabled
Enabled
DTE Loops The V.35 interface can
request LALs and RDLs
using its RRDL and RLAL
pins. If DTE loops are dis-
abled, requests for loopbacks
on these pins will be ignored.
Enabled or
Disabled
Enabled
TX Clock The serial TX data can be
sampled on either the falling
edge (normal) or rising edge
(inverted) of the TX clock.
Normal or
Inverted
Normal
Timeslots The number of DSL timeslots.
This controls both the DSL and
the serial data rate. The data
rate is calculated by the equa-
tion: data rate = #timeslots x
64k
1–72 4