Filter
Top Products
18 •• Loading Supplies Users Manual - 610/611/612 Printers
7. Lay the label strip across the supply guide (B). It is not necessary at this point to put
the label strip in the guide. Lay the label strip across the platen roller (C) and thread the
end of the strip into the gap between the platen roller and the auxiliary feed (D).
B
C
D
8. Reach under the platen roller and pull the label strip back towards the turn bar (F).
Thread the label strip under the guide roller (E) and around the turn bar (F) as shown
below.
E
F