Filter
Top Products
48 •• Troubleshooting Users Manual - 610/611/612 Printers
018 Code page selection defined in the field must be 0 (Internal), 1 (ANSI), 2 (DOS
437), or 3 (DOS 850).
020 Vertical magnification must be 1 to 7.
021 Horizontal magnification must be 1 to 7.
022 Color must be B, D, O, R, or W.
023 Intercharacter gap must be 0 to 99 dots.
024 Field justification must be B (balanced), C (centered), E (end), L (left), or R (right).
025 Data length is outside the range 0 to 2710.
030 Bar code height must be at least 20 (English), 51 (Metric), 40 (Dots), or is not within the
supply dimensions.
031 Human readable option must be 0, 1, 5, 6, 7, or 8.
032 Bar code type is invalid.
033 Bar code density is invalid.
040 Line thickness must be 0 to 99 dots.
041 Line direction must be 0, 90, 180, or 270.
042 The line segment or box end row is defined outside of printable area.
043 The line segment or box end column is defined outside of printable area.
044 Dot pattern for line or box must be “ “.
045 Line length is defined beyond the maximum length.
046 Line type must be S (segment) or V (vector).
051 Imaging mode in the graphic header must be 0.
101 Format referenced by batch is not in memory.
102 Print quantity is outside the range 0 to 32000.
104 Batch mode must be N (new) or U (update).
105 Batch separator must be 0 (off) or 1 (on).
106 Print multiple is outside the range 1 to 999.
107 Cut multiple is outside the range 0 to 999.
108 Multiple part supply is outside the range 1 to 5.
109 Cut type is invalid.
200 Option number must be 1, 4, 30, 31, 42, 50, 60, or 61.
201 Copy length is outside the range 0 to 2710.
202 Copy start position must be 1 to 2710.
203 Destination start position must be 1 to 2710.