Filter
Top Products
2-8 Loading Supplies & Printing
Loading Labels for Peel Mode
Peel mode separates the label from the backing paper
while printing.
Note: The minimum label length for peeling is 0.75-
inches (19 mm). Hold the leading edge of
peeled labels when printing on supply longer
than six inches.
1. Press the cover release levers (located on each
side of the printer) towards the front of the printer
to release the cover.
2. Lift open the cover.
3. Pull out the peel door located on the front of the
printer to display the peel roller and the peel bar.
Peel Door
Peel Bar
Peel Roller