Filter
Top Products
2-16 Loading Supplies & Printing
11. Close the cover until it locks in place.
12. Press the FEED button. The indicator light should
be GREEN.
13. Calibrate the supply, if necessary.
See “Calibrating the Supply,” for more information.
Calibrating the Supply
1. Turn off the printer.
2. Press and hold the FEED button while turning on
the printer.
3. Release the FEED button after the indicator light
starts flashing ORANGE. The printer calibrates
the black mark or die cut sensor, measures the
label length, and prints the test labels.
4. To resume normal printing, turn off the printer,
wait two seconds, then turn it back on again.