Filter
Top Products
Syntax
{G,graphID,action,device,units,row,col,
mode,"name"
p
G1. G Graphic Header.
G2. graphID Unique number from
0
-
999
to identify the graphic image.
G3. action The action to perform to the graphic. Options:
A
Add the graphic.
C
Clear the graphic from the printer.
G4. device Graphic storage device:
R
Volatile RAM (format must contain a graphic field)
T
Temporary Storage
F
Flash Memory
Note:
If you are using flash memory, send the graphic only
once. Then, send only batches to reference it. If you
re-send the graphic each time, it creates separate
copies, and eventually fills up flash memory.
G5. units Unit of measure. Options:
E
English, measured in 1/100 inches
M
Metric, measured in 1/10 mm
G
Graphic, measured in dots. For bitmapped graphics, G is
the only valid option.
G6. row Distance between the bottom of the graphic image area and
the first bitmap line. This is usually 0, unless you want a fixed
amount of white space around the graphic image. See
"Positioning the Graphic Image," for more information.
English
0
-
1200
Metric
0
-
3045
Dot
0
-
2436
G7. column Distance between the left edge of the graphic image area and
the left edge of first bitmap line. This is usually
0
, unless you
want a fixed amount of white space around the graphic image.
See "Positioning the Graphic Image," for more information.
English
0
-
283
Metric
0
-
719
Dots
0
-
574
G8. mode Imaging mode. Enter
0
.
G9. "name" Graphic name (optional), 0-8 characters, enclose within
quotation marks.
5-12 Creating Graphics