Filter
Top Products
622 Not enough memory to create the downloaded TrueType
characters in the scalable (vector) fonts buffer.
Reconfigure the printer’s memory and increase the
scalable (vector) fonts buffer. Resend the font, format,
and batch packet after reconfiguring the memory. See
"Reconfiguring Memory" for more information. If the
error message persists, call Technical Support.
Machine Faults
These errors occur when there is a problem with the printer.
703 The printer sensed a calibration of different-sized black
marks. Make sure the correct supply is loaded.
704 Printer has not sensed a supply mark within the
specified number of inches or is out of supplies. Check
the supply tracking, supply marks, black mark sensor
position, and supply roll for binding. Press the A
button under the x icon to clear the error. Change
supply.
750 Printhead is overheated. Turn off the printer to let the
printhead cool. If the error persists, call Technical
Support.
751 Printer did not sense a black mark when expected. The
supply may be jammed.
For these errors, Check the
✦
supply tracking
✦
supply marks
✦
black mark sensor position
✦
supply roll for binding.
If the error continues to appear, change the supply.
752 Printer sensed a mark in the wrong place.
8-16
Troubleshooting