Filter
Top Products
Data Formatting Failures
Formatting errors indicate that a field will print incorrectly. After
you have checked the data stream and corrected the data,
retransmit the format and batch.
For these errors, the batch still prints, but the
field, font, bar code, or density may be
incomplete, missing or contain
incorrect data.
574 No CD scheme or room for CD. The CD scheme in the
batch does not fit the format or the field contains blanks.
575 The graphic included in your format could not be found.
611 Font, bar code or density is invalid. The font, bar code
or density in the batch does not fit the format.
612 The data in this line of the batch is either missing or
does not match the format.
613 Reference point off tag.
614 Portion of field off tag. There may be an invalid
character in the packet. Make sure you did not enter O
for Ø.
616 Dot shifting failed. A bad dot falls on a bar code that
cannot be shifted. Call Technical Support.
618 Magnification must be 1 - 7.
621 An error occurred opening the TrueType font file. Select
a different font to download. If the error message
persists, call Technical Support.
Troubleshooting
8-15