Filter
Top Products
Sending Immediate Commands
Immediate commands consist of a three- or four-character
sequence you can send in a packet or embed in your application.
Each command must be sent separately.
Syntax
control character_immediate command
The printer can accept only one immediate command at a time.
Sending a command before the previous one is completed can
result in an error.
Example
^CB
Immediately cancels the batch currently printing unless an error
exists in the printer. This example assumes that the defined
immediate command control character is the caret (^).
The table represents the defined immediate command control
character as ^ and the defined status polling control character as
d. You may define these characters to suit your needs.
To use the immediate command control character or the status
polling character within your data, use the tilde sequence.
2-16
Configuring the Printer