Filter
Top Products
3. On a firm surface, using a piece of cardboard for a pad,
stand the axle on one end. Hammer an end cap onto the
axle. The end cap should lock firmly.
4. Slide the following parts, in this order, onto the axle: one
wheel, one washer, and two axle mounts. (Figure 1.)
nDo Not install the second end cap without first inserting the
axle mounts into the sockets. The sockets prevent the axles
from being positioned too close together.
Figure 1
Axle
Mount
Axle
Wheel
end
cap
Washer
Washer
9476 Assembly and Setup Instructions
1-4