Paxar Monarch 9476 Printer User Manual


 
Important Charging Information ----------------------------------------------------------
w
DANGER! RISK OF ELECTRICAL AND FIRE HAZARD.
CERTAIN ACTIONS MAY RESULT IN DEATH, SERIOUS
INJURY, SHOCK, OR BURNS.
Do Not disassemble the battery charger; take it to an
authorized repair center for repair or service.
Do Not operate the Station while the battery charger is
charging.
Do Not expose the battery charger to rain or snow.
Never charge a frozen battery.
Plug only into a grounded outlet with three holes. Do
Not alter the AC power cord or plug provided. Do Not
operate the battery charger with a damaged cord or
plug.
Do Not let the battery remain fully or partly discharged
for a long time; keep it charged.
If using an extension cord, you must use #18 or
heavier for lengths up to 50 feet, or #16 or heavier for
lengths up to 100 feet. Use of improper extension cord
could cause fire and electric shock.
Pull on the plug rather than the cord when
disconnecting the battery charger. Locate the cords
where they will not be stepped on, tripped over, or
otherwise subjected to damage or stress.
The battery must be charged when the voltage is
10.5V or less. Print a test label to determine the
voltage. The charger will not charge if the voltage is
less than 3 volts. Call Technical Support for
information about charging a "deeply discharged"
battery.
9476 Assembly and Setup Instructions
3-2