Filter
Top Products
Attach the Drop Shelf
1. Remove the following items from their packaging:
✦ (1) support brace
✦ (1) metal rod
✦ (1) drop shelf
✦ (2) end caps
✦ (2) 1/4"-20 x 1/2" phillips screws
✦ (2) plastic washers
2. Attach the support brace to the Station’s corner supports
on either the front or the rear of the Station using two 1/2"
phillips screws. The open side of the support brace must
face down. (Figure 6.)
nDo not tighten the screws completely.
Figure 6
Corner
Support
Support
Brace
9476 Assembly and Setup Instructions
1-10