Filter
Top Products
2. Position the printer bracket on the top shelf of the Station,
facing one of the Station’s fan-fold slots as shown. Align
the holes in the printer bracket with the holes in the shelf
and fasten with 8mm screws and M4 nuts. (Figure 16.)
nAll printer brackets must face the same direction.
Attach the Printers
For each printer you install, follow these steps:
nSee your 9490 Operator’s Handbook for more information on
attaching the power pack and communication cable.
Figure 16
Printer
Bracket
Fan-Fold
Slot
Chapter 1. Assembling the Station
1-23