Filter
Top Products
Chapter 3. Charging the Battery
The Station’s battery charger is a fully automatic,
maintenance-free charger. You must charge the battery before
using the printers on the Station.
To charge the battery, plug the Station’s AC power cord into a
grounded outlet. The status light on the front of the Station
indicates that the station is receiving power. (Figure 39.)
Charge the Station’s battery:
✦ before using the Station for the first time (charge it for
6 hours)
✦ when a printer’s LED indicates a "low battery" condition
(see "Battery Life" for indications of low battery
conditions)
✦ when the Station is not in use.
nWhen the Station is not in use, always leave the battery
charger plugged in and charging. The battery charger is
"intelligent;" it monitors the battery condition and does not
overcharge the battery.
Figure 39
Status
Light
3-1